Table of Contents
There’s hardly anything better than dipping in your pool on a hot summer day. But that’s only if the water is clean, which can be a bit tedious to achieve.
Manual cleaning takes time and quite some effort. Picking up all the leaves and debris is so annoying you probably wouldn’t even feel like swimming anymore.
The best solution is to go for the best above ground robotic pool cleaner. These cleaners are more reliable and don’t require your assistance.
Still, going through as many above ground pool robots can be a bit overwhelming, which is why we reviewed the best. We also prepared a little buyer’s guide to help you choose.
|18 x 22 x 12 in||22.8 lbs||for pools up to 30 feet|
|22 x 18 x 8.1 in||14 lbs||for pools up to 30 ft|
|26.1 x 18.9 x 12.6 in||30.1 lbs||for pools up to 12m in length|
|21 x 18 x 19 in||10 lbs||Unknown|
|20 x 28 x 15 in||31.3 lbs||for pools up to 50 ft|
Top Picks of Robotic Cleaners for Above-Ground Pools
Dolphin E10 Automatic Robotic Pool Cleaner
Dolphin E10 is made specifically for up to 30′ above ground pools. It takes about 1.5 hours to complete the task, leaving your swimming pool sparkling clean.
This one cleans on its own, which means you don’t have to stay near once you place it in the pool. Instead, it allows you to use that time for whatever else you like.
It’s important to note that this one doesn’t require any additional hoses or pumps. It’s a highly efficient robot, operating at the cost of 5 cents per hour.
This is a plug-and-plug product, meaning that it comes ready for use. There’s no installation, so you can just plug it in and leave it to work.
It has a reliable filtration system, trapping and locking all debris. It’s also easy to empty thanks to its quick water-release system.
- Large, sturdy handle
- Easy to empty
- Catches all sorts of debris
- The cord tends to tangle
Dolphin Escape Robotic Above Ground Pool Cleaner
Dolphin Escape is among the best above ground pool cleaners thanks to its efficient and quiet operation. Its low voltage DC motors use nearly 90% less power, operating at 5 cents per hour.
It has an active scrubbing brush that helps it remove algae and built-up grime and debris. Also, this one won’t slip around or lose its way. It has useful Hypergrip wheels that grip onto the surface, allowing it to move freely.
One of the best things about this one is its filtration system. It comes with a massive filter cartridge that you can easily access from the top.
Its smart navigation and scanning software help it clean more efficiently. The robot won’t move around randomly. Plus, it can sense drains, walls, and ladders, which helps it to avoid them.
- SmartNav 2.0 technology
- Dual-motor system
- Efficient filtration
- Requires frequent emptying
PAXCESS Automatic Pool Cleaner
Paxcess looks a bit different than most above ground robotic pool cleaners. However, it does an extraordinary job thanks to its advanced intelligent computer program and schedule system.
You can set it up to clean your pool for one, two, or three hours. It will clean the bottom and the walls thoroughly and without any assistance.
This one has fur PVA sponge roller brushes that scrub and clean even the most persistent dirt. The front sponge brushes remove the debris from the floor while the back ones go across whatever is left for a better result.
Keep in mind that Paxcess is recommended for above floor pools that are up to 12m in length. It has a swivel cord that won’t tangle, allowing the robot to move with ease.
Also, it has an extra-large top-access filter basket that’s simple to empty and clean.
- Powerful suction
- It cleans floors and walls
- A bit bulky and heavy
Aquabot APRVJR Pool Rover Junior Robotic Above-Ground Pool Cleaner
Aquabot APRVJR Pool Rover Junior is among the most popular above ground robotic pool cleaners. It comes with a 40′ long floating cable, a power supply transformer, and a built-in 2-micron filter bag.
It’s a fully automatic robotic pool cleaner that works in rectangular, oval, and round above ground pools. In most cases, Pool Rover Junior takes about an hour or less to complete the cleaning process.
This Aquabot pool robot is powered by a 24-volt pump motor. It’s what provides powerful suction while the jet-drive propulsion is at the touch of a button as well.
Pool Rover Junior has extra-wide non-marring wheels that help it go across all surfaces. It’s suitable for vinyl, fiberglass, tile, concrete and gunite surfaces, reducing water and energy costs.
Also, its two-hour automatic shut-off prevents it from overheating in case you leave it to work.
- For large debris, algae and fine dirt
- Wide wheels
- Non-tangle cord
- Might leave some spots
QOMOTOP Automatic Wall-Climbing Swimming Pool Cleaner
Qomotor is an automatic wall-climbing robotic pool cleaner. Its dual-motor system features four scrubbing brushes for removing even the most persistent, ground-in dirt.
The four non-slip sponge brushes grip to the floor and the walls, cleaning everything on their way. On top of that, this one can also clean the waterline and is unlikely to get stuck anywhere in the pool.
The advanced computer-controlled technology helps the robot to navigate while cleaning. This way, it removes all debris from all areas of your swimming pool.
Its filters are easy to clean as well. Just press the button to open the top cover, remove the baskets and rinse them with water.
Qomotor is IPX8 waterproof, which means you can leave it underwater as it won’t damage it in any way.
- Scrubs walls and waterline
- 50′ long cable
- Two large filters
- The cleaning process can take long
A robotic pool cleaner can make all the difference when it comes to cleaning your swimming pool. We all know that picking up debris from the bottom of the pool is no easy task. This is where your robotic pool cleaner comes into play.
Still, the market is packed with above ground robotic pool cleaners. The safest way of choosing among these cleaners is to consider all the most critical buying factors that we mention below.
Types of Above-Ground Pool Cleaners
The first thing you should do is learn a little about each type of above ground pool cleaners. They all do the same job, but the process is slightly different.
For this reason, some may be better for your pool shape and size than others. The best way of figuring out which is the best for you is to consider them all, keeping in mind your needs and preferences.
Robotic cleaners are self-contained, low-voltage electric devices that use motors, sensors, and chips. These are often considered the most convenient because they don’t use the pool’s circulation system. As a result, robotic pool cleaners don’t produce back pressure or resistance on the pool’s filter system.
Most models work the same, although it’s always recommended that you read the included instructions for more guidance. All you have to do is let the debris settle to the floor before you let the above ground pool cleaner to work.
Nearly all robotic cleaners have self-contained filters that are easy to clean.
A pressure-side cleaner attaches to the pressure side of the pool’s circulation system. Some people call these booster pump cleaners because they’re propelled by the water that’s pushed back to the pool.
These have quite a few advantages and are quite efficient. A pressure-side cleaner has its own filtration bag, which means it won’t compromise the pool filter and pump basket. Also, it does a great job of distributing filtered water.
It continues to work even when its filter bag is full. It may not be as efficient when full, but it will still pick up something.
A suction-side cleaner is a bit different, using the main filtration pup to pick up debris that’s then returned to the pump basket. These are susceptible to low flow issues, which is why you need a filter that’s 3/4 horsepower or higher.
It’s a vacuum cleaner that uses the suction of the main pool pump. It usually comes with a hose that you have to connect to the skimmer or a dedicated suction line if you have one.
However, these aren’t the best for leaves and larger debris. In most cases, a suction side cleaner is great for removing dirt and sand.
Pool Size & Type
Cleaning a larger pool isn’t the same as cleaning a small one. Larger above ground pools require more time, energy, and power consumption. You also need a longer power cable, possibly at least 40′ in total. The pump has to be strong enough, as well.
Above ground pool robots have smart mapping and other technologies that help them navigate. Think about if the cleaner of your choice can handle the shape and size of your pool.
As we mentioned, robotic pool cleaners have their own filters. They don’t require your pool’s filtration, which makes robots easier to use when compared to other types.
It’s a separate filtration system that consists of one or two baskets. These are usually accessed from the top, so they’re pretty easy to empty. Also, these filters are easy to maintain since all you have to do is rinse them once you throw the dirt out.
Although an above ground pool cleaner is electric, it uses very little power to operate. In most cases, cleaning above ground pools takes an hour or two. During that time, most above ground pool robots operate at the cost of 5 cents per hour.
Nearly all models use the same amount of power. Even if there’s a difference, it’s a rather small one, which is why these are considered the most economical and convenient.
Think about the type of dirt you’re usually dealing with to find the best above ground pool cleaner for your needs.
It’s an important thing to consider because not every cleaner for above ground pools can pick up both large and small pieces. Some are only designed to clean dirt and sand, leaving leaves and larger pieces behind.
Make sure to look for a more versatile cleaner for above ground pools if you usually deal with all kinds of dirt.
You want a cleaner that’s easy to work with, and, for this reason, you should pay attention to maneuverability. In most cases, maneuverability depends on just a few things like wheels, cord length, and the hose.
Make sure that the pool cleaner of your choice has non-slip wheels that will allow it to maneuver around the area. Also, having a long cord is equally as important if you have a larger pool.
How Does an Above-Ground Robotic Pool Cleaner Work?
Most robotic cleaners for above ground pools work the same. The difference in the process usually comes from a few high-tech features that some models have.
The first thing you should do is plug a transformer into a wall outlet before plugging the cleaner’s cord into the transformer.
What the transformer does is transform the 110 volts from the wall outlet to some 24 volts. This powers the cleaner’s pump motor, which draws dirt into the filter. It also powers the drive motor, allowing the pool cleaner to move with ease.
The pump motor takes water from under the cleaner, throwing it out at the top. Inside the pool cleaner, the dirty water is filtered before it’s sent out. The filter catches all the dirty stuff so that none of it goes back into the pool.
Some cleaners for above ground pools are more advanced than others. This means they use chips and sensors that allow them to avoid obstacles.
One thing to keep in mind is that cleaners for above ground pools aren’t meant to climb walls. However, some models can do that, cleaning the waterline as well. These are more advanced and typically more expensive as well.
Why Choose a Robot Vacuum Cleaner for Your Above-Ground Pool?
Cleaning with a manual tool may be a cheaper way of doing it, but it’s far from the most efficient and convenient. A robot cleaner may be more expensive to buy, but it’s much easier and less time-consuming to use.
Plus, it’s superior to other types of pool cleaners for several reasons. Take a few seconds to check the guide below as we explain why a robot may be a better choice for your above ground pool.
Ease of Use
Nearly every robotic cleaner is ready to use right out of the box. It’s a feature that every pool owner will love because it makes the robot easy to use. Whether you’re cleaning an Intex swimming pool or some other type, a robot is a handy choice.
It requires no assembly, tools, or installation process. Plus, the cleaning process is equally as simple since you don’t have to supervise it. With good maneuverability features, it’s unlikely that your robot will get stuck anywhere.
It takes a press of a button and an occasional emptying and rinsing to keep these cleaners running.
Although robot cleaners for an above ground pool are a bit more expensive, they’re cost-efficient. As we said, they don’t use a lot of power, so the entire cleaning process doesn’t cost as much.
In the long run, you’ll notice that all you had to do was invest in a good cleaner. These are easy to maintain, and you won’t have to buy any replacement filters and components any time soon.
Safe for the Environment
Robot pool cleaners are eco-friendly and safe to use. These don’t produce any hazardous chemicals that could mix with the water in your pool and potentially harm someone.
Its heat is well-controlled, and it doesn’t produce any gases or chemicals that would be harmful to the environment. This is one of the reasons why these cleaners are also a bit more expensive than the rest.
Superior Cleaning Performance
Robot cleaners are superior to most other types. Most robots can navigate around the pool without any assistance on your part, picking up even the most persistent dirt, algae, dust, and microscopic bacteria.
Some of the best models can climb the walls of your pool as well. Plus, the entire cleaning process is rather simple, even when it comes to removing dirt from the corners.
Robots are probably the only cleaners that can remove both external and internal dirt. They can clean leaves, twigs, dust, chemicals, and bacteria, as well as lotions, urine, and sweat.
Not only can you leave the robot to work without your assistance, but you also don’t have to worry about maintenance. These are usually low-maintenance, which is just one of the reasons why they’re so cost-efficient.
Robots have built-in filtration that’s easy to clean. In most cases, all you have to do is remove the canister filter and clean the bag.
The maintenance level, as well as the entire process, differs between models, but they’re usually quite simple nonetheless.
Does it now feel simpler to choose a robotic pool cleaner? It’s because you now know all the most critical factors that you should pay attention to.
Keep these things in mind when choosing among the robotic cleaners we reviewed. These are the best models that the market has to offer, so you probably won’t go wrong with either one of them.
However, you still want to find what’s best for your above ground pool. Think about its size and shape, as well as the type of dirt you usually find in there. Small things matter as well, so remember to consider the cord length as well.
This can help you determine the best size, power, and features you need in a robotic cleaner so that it can efficiently clean your above ground pool.
Sources and Resources
- Swimmer, Protect Thyself: Cleaning Up the Pool Environment
- How to Use a Pool Vacuum